projected
Kort & Matrikelstyrelsen, Copenhagen.
2002-01-26
true
true
http://www.opengis.net/def/crs/EPSG/0/2298
Qornoq 1927 / Greenland zone 2 east
Coordinate system second axis has abbreviation E but is positive to the west.
Greenland - east of 44°W and between 78°N and 81°N, onshore.
-44
-14.33
78
81
OGP
2011-07-27
false
false
http://www.opengis.net/def/area/EPSG/0/2557
Greenland - east - 78°N to 81°N
Topographic mapping.
conversion
Kort og Matrikelstyrelsen, Copenhagen.
2002-01-26
true
false
79
30
N
24
W
http://www.opengis.net/def/coordinateOperation/EPSG/0/18422
Greenland zone 2 east
Greenland - east of 44°W and between 78°N and 81°N, onshore.
-44
-14.33
78
81
OGP
2011-07-27
false
false
http://www.opengis.net/def/area/EPSG/0/2557
Greenland - east - 78°N to 81°N
Topographic mapping
ISO 1000.
1995-06-02
false
http://www.opengis.net/def/uom/EPSG/0/9001
metre
Also known as International metre. SI standard unit.
length
0
EPSG guidance note #7-2, http://www.epsg.org
2002-01-16
false
true
See Lambert Conic Conformal (1SP), code 9801, for general methodology.
http://www.opengis.net/def/method/EPSG/0/9826
Lambert Conic Conformal (West Orientated)
Note: These formulas have been transcribed from EPSG Guidance Note #7-2. Users are encouraged to use that document rather than the text which follows as reference because limitations in the transcription will be avoided.
In older mapping of Denmark and Greenland the Lambert Conic Conformal is used with axes positive north and west. To derive the projected Westing and Northing coordinates of a point with geographical coordinates (Lat, Lon) the formulas are as for the standard Lambert Conic Conformal (1SP) case (coordinate operation method code 9801) except for:
W = FE ? r.sin(theta)
In this formula the term FE retains its definition, i.e. in the Lambert Conic Conformal (West Orientated) method it increases the Westing value at the natural origin. In this method it is effectively false westing (FW).
The reverse formulas to derive the latitude and longitude of a point from its Westing and Northing values are as for the standard Lambert Conic Conformal (1SP) case except for:
theta' = arctan[(FE ? W)/{r0 ? (N ? FN)}]
r' = +/-[(FE ? W)^2 + {r0 ? (N ? FN)}^2]^0.5, taking the sign of n.
2
2
79.5
EPSG guidance note number 7.
1999-09-09
false
The latitude of the point from which the values of both the geographical coordinates on the ellipsoid and the grid coordinates on the projection are deemed to increment or decrement for computational purposes. Alternatively it may be considered as the latitude of the point which in the absence of application of false coordinates has grid coordinates of (0,0).
http://www.opengis.net/def/parameter/EPSG/0/8801
Latitude of natural origin
-24
Abbeviated as "CM".
Abbreviation for "Central Meridian".
EPSG guidance note number 7.
2002-06-22
false
The longitude of the point from which the values of both the geographical coordinates on the ellipsoid and the grid coordinates on the projection are deemed to increment or decrement for computational purposes. Alternatively it may be considered as the longitude of the point which in the absence of application of false coordinates has grid coordinates of (0,0). Sometimes known as "central meridian (CM)".
http://www.opengis.net/def/parameter/EPSG/0/8802
Longitude of natural origin
1
EPSG guidance note number 7.
1999-09-09
false
The factor by which the map grid is reduced or enlarged during the projection process, defined by its value at the natural origin.
http://www.opengis.net/def/parameter/EPSG/0/8805
Scale factor at natural origin
0
This alias applies only in the case of projection methods which have an axis positive west, e.g. Transverse Mercator (South Orientated).
EPSG guidance note number 7.
2002-07-31
false
Since the natural origin may be at or near the centre of the projection and under normal coordinate circumstances would thus give rise to negative coordinates over parts of the mapped area, this origin is usually given false coordinates which are large enough to avoid this inconvenience. The False Easting, FE, is the value assigned to the abscissa (east or west) axis of the projection grid at the natural origin.
http://www.opengis.net/def/parameter/EPSG/0/8806
False easting
0
This alias applies only in the case of projection methods which have an axis positive south, e.g. Transverse Mercator (South Orientated).
EPSG guidance note number 7.
2002-07-31
false
Since the natural origin may be at or near the centre of the projection and under normal coordinate circumstances would thus give rise to negative coordinates over parts of the mapped area, this origin is usually given false coordinates which are large enough to avoid this inconvenience. The False Northing, FN, is the value assigned to the ordinate (north or south) axis of the projection grid at the natural origin.
http://www.opengis.net/def/parameter/EPSG/0/8807
False northing
geographic 2D
Kort & Matrikelstyrelsen, Copenhagen.
2006-03-16
true
false
http://www.opengis.net/def/crs/EPSG/0/4194
Qornoq 1927
Greenland - west coast onshore.
-73.29
-42.52
59.74
79
OGP
2014-05-01
false
false
http://www.opengis.net/def/area/EPSG/0/3362
Greenland - west coast
Geodetic survey.
ellipsoidal
OGP
2008-06-23
false
http://www.opengis.net/def/cs/EPSG/0/6422
Ellipsoidal 2D CS. Axes: latitude, longitude. Orientations: north, east. UoM: degree
Coordinates referenced to this CS are in degrees. Any degree representation (e.g. DMSH, decimal, etc.) may be used but that used must be declared for the user by the supplier of data. Used in geographic 2D coordinate reference systems.
http://www.opengis.net/def/axis/EPSG/0/106
Lat
north
http://www.opengis.net/def/axis/EPSG/0/107
Long
east
geodetic
Kort & Matrikelstyrelsen, Copenhagen. Origin coordinates from NIMA http://earth-info.nima.mil/
2008-06-24
false
http://www.opengis.net/def/datum/EPSG/0/6194
Qornoq 1927
Topographic mapping.
Fundamental point: Station 7008. Latitude: 64°31'06.27"N, longitude: 51°12'24.86"W (of Greenwich).
1927-01-01
Cartesian
OGP
2002-01-26
false
http://www.opengis.net/def/cs/EPSG/0/4501
Cartesian 2D CS. Axes: northing, westing (N,E). Orientations: north, west. UoM: m.
Used in Danish projected coordinate reference systems. Note that second axis has abbreviation E but is positive west.
http://www.opengis.net/def/axis/EPSG/0/45
N
north
http://www.opengis.net/def/axis/EPSG/0/46
E
west